30
Sharp blade can cut limbs
The sound power level
indicates by L
WA
in dB.
In accordance with essential
applicable safety standards of
European directives
Consult the manual.
This appliance is double
insulated; therefore no earth
wire is required. Always check
that the power supply
corresponds to the voltage on
the rating plate.
WARNING: Packaging
materials are not toys!
Children must not play with
plastic bags! Danger of
suffocation!
ELECTRICAL SAFETY
Always check that the
power
supply corresponds to the
voltage on the rating plate.
Items supplied
Fig.1
1. Blade guard
2. Blade
3. Four-Position Pivoting Head
4. Telescopic Pole
5. Lock-Off Button
6. Rear Handle
7. Switch Trigger
8. Cord Retainer
Fig.2
9. Packaged Tool
10. Cord
11. Collar
12. Trimmer Head
13. Lock Hole
14. Egg-Shaped Pole
15. Collar
Fig.4
16. Pivot Button
17. Notches
Fig.5
18. Locking screw
Technical data
Voltage
230-240V ~ 50Hz
Power consumption
450 W
Cutting length
460 mm
Cutter rail length
510 mm
Tooth spacing
16 mm
Cuts/min
1850 min
-1
Weight
4.0 kg
Acoustic pressure level
LpA 75.8 dB(A) K = 1.051 dB(A)
Acoustic power level
LwA 95.8 dB(A) K = 1.051dB(A)
Sound power level dB(A) LwA
Guaranteed: 97
ATTENTION !
The sound power pressure
may exceed 85 dB(A), in this
case individual hearing
protection must be worn.
Weighted root mean square acceleration
according to relevant standard. :
Front handle 1.643 m/s²
K = 1,5 m/s².
Rear handle 1.656 m/s²
K = 1,5 m/s².²..
The declared vibration total value
has been measured in accordance with a
standard test method and may be used for
comparing one tool with another that the
declared vibration total value may also be
used in a preliminary assessment of
exposure.
A warning that the vibration
emission during actual use of the power
tool can differ from the declared total value
depending on the ways in which the tool is
used and of the need to identify safety
measures to protect the operator that are
based on an estimation of exposure in the
actual conditions of use (taking account of
all parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
