72
INSTALLING THE METAL BLADE
1.Set the inner holder to the gear shaft, and turn to fix with the attached L-shaped bar.
2.Put the blade on the inner holder with the face with letters to the gear case, and match correctly the hole of the blade to
the projection of the inner holder.
3.Set the outer holder to the gear shaft with the hollowed face to the blade.
4.Put the attached bolt cover on the outer holder and secure it with the bolt (left screw) together with the spring washer
and the washer.
Speed Max 8000min-1
Harness adjustment
Caution: Always use the harness when using the brush cutter
Fasten the harness once you have started the engine and the engine
is idling. Stop the engine before removing the harness.
