71
(1)Idle adjustment screw (2)High (3)Low
MAINTENACE BEFORE STORAGE
1.Brushing off dirt form the machine, check damage or slack of each part. If you find out
abnormalities, repair them for the next use.
2.Extract fuel from the tank, and loose the draim screw of the float cabin to extract fuel, turn on the engine, and leave it
running until it stops naturally.
3.Remove the spark plug and put in 1~2 CC of 2-cycle oil in the engine. Draw the starter ropes 2~3 times, set the plug
back, and stop it at the contraction position.
4.Apply anti-rust oil to the metal parts such as the throttle wire, put the cover on the blade, and keep it in door avoiding
dampness.
9. SPECIFICATIONS
Name
Brush cutter
Brushcutter Model
DCBT33D-2S
diameter blade
255 mm / 7200min
-1
Speed Max 10000 min
-1
spool diameter
440 mm / 6800min
-1
Handle type
Both hands
unit without cutting attachment,
empty tank
6.8 Kg
accessory device with specified
cut, empty tank
7.1Kg
Unit with specified cutting
attachment, full tank
7.6Kg
Outward side
2300X320X450mm
blade 3 teeth
25.5cm
Spool
440mm
Power transmission method
Automatic centrifugal clutch spiral gear
Reduction rate
13:10
Blade rotating direction
Counterclockwise (from operator
′
s view)
Gasoline
Engine
Model
1E36F
Type
Single cylinder air cooling 2-cycle
Displacement
33 cm³
Max.Output
1.1Kw/9300min
-1
Max.Torque
1.6 N·m/
3000min
-1+/-300
Fuel tank capacity
0.8L
Fuel used
Mixing rate 30:1
Lubricant oil
FC2-Stroke engine oil
Carburetor
Float piston valve
Sparking method
IC-controled fly wheel magnet
Spark plug
L7RTC
Starting mehtod
Recoil starer
Stopping method
Sparking circuit primary short(push button)
Net weight
3.5 Kg
*Specifications are subject to change without notice!