english
CLEANING AND CARE
Avoid the effects of moisture (spray or rain water), dust as well as direct insolation on the
device. Clean the device exclusively with a dry linen cloth; in case of heavy dirt accumulation,
it may be slightly moistened. Do not use any detergents containing solvents.
DECLARATION OF CONFORMITY
The declaration of conformity can be obtained from our website:
www.shop.elektrotechnik-schabus.de
For your own safety and reassurance, we recommend that you carry out
this test every month!
Regularly clean the sensor by blowing off any dust.
ALARM
If there is an escape of gas, the system gives an alarm once the sensitivity threshold is ex-
ceeded. The electronic siren sounds and the LED (Function) flashes
red
.
WHAT TO DO IN CASE OF ALARM
Do not unplug the alarm unit
•
Do not switch on any other electrical devices or appliances
•
Do not ignite any open flame, turn off any open flame already lit
•
Immediately open windows and doors and thoroughly ventilate the area or house. Inform
•
any other people in the house. Everyone must leave the house!
Search the area or house for any points of combustion/fire. Carbon monoxide is
•
developed by incomplete (smoky) combustion. Important: everyone must leave the
house!
Eliminate the cause of the escape of gas. In the event of uncertainty, contact your
•
energy supply expert/adviser
In the event of persistent/repeated alarm, contact your energy supply expert/adviser or
•
the fire service
FALSE ALARM
The sensitive system sensor also responds to other gaseous media. The use of aerosols (gas
propellant in hair, disinfectant, alcohol etc. sprays), as well as strong tobacco fumes (smoking
card party) can lead to a false alarm.
FUNCTIONAL TEST
A simple functional test of the alarm unit can be carried out with butane gas from a cigarette
lighter. A short burst of gas, without igniting the lighter, triggers an alarm and the LED (func-
tion) flashes
red
.
