background image

9

EN

GLISH

THANK YOU FOR YOUR CONFIDENCE!

In order to be able to constantly guarantee the product’s optimum functionality and readiness 

for operation as well as your safety, we have a request: Please thoroughly read this operating 

instruction prior to the first use and observe all safety instructions! The operating instruction 

is a component of this product. Keep this, so you can always refer to it.

Operating instructions

EN

2. SAFETY INSTRUCTIONS

2.1 General

• 

Before you start mounting the device please read the operating instructions carefully.

• 

The installation shall be performed by qualified personnel.

• 

Packaging material is not a children´s toy. Keep it away from children!

2.2 Ambient conditions

The  standards  used  to  assess  the  product  specify  limit  values  for  use  in  the  living  area, 

business area and in small enterprises; the product has been intended for use in the following 

operating environments:

• 

Residential buildings/living areas such as houses, flats, rooms, etc. selling areas such as 

shops, wholesale markets, etc.

• 

Premises of small enterprises such as workshops, service centers, etc.

• 

All areas of application characterize themselves by a connection to the public low voltage 

mains.

1. DELIVERY SCOPE

 

1 control device GX-A1+  without sensor

 

1 operating manual

 

► 1 Assembly material (4 screws , wall plugs)

Accessories (not included in delivery)

 

► gas sensor, must be ordered separately according to the type of gas

 

warning lamp

 

telephone dialer

 

► cut-off valve

 

alarm horn

3. APPROPRIATE USE

The GAS ALARM GX-A1+ is a gas warning device for various gases and can already deliver 

a warning at a gas concentration that lies below life-threatening values. This monitoring sy

-

stem is, therefore, in line with its purpose, set to a very high sensitivity. For each type of gas, 

a suitable sensor must be used (for information on trigger levels and minimum concentration, 

see the instructions for the sensor).

An LCD display keeps you continually informed of the current gas concentration. The alarm is 

signalled acoustically and optically. At the same time, a potential-free relay contact is closed, 

which can be used, for example, to cut off the gas line by means of a magnetic cut-off valve 

so that no further gas can escape from any leakage of the gas line or gas furnance. The de

-

vice may not be used in areas with a risk of explosion. Another use of the device as described 

above is not authorized.

Summary of Contents for 300892

















Reviews: