P-E mode
ElektroPhysik
E-11
《
6.4.1.1
》
P-E mode
Under the P-E mode, there are five measuring modes provided, users can
select different measuring modes according to their requirements and
measuring environments.
Press key, select “measurement”, the instrument displays:
1. Standard
: display the current value, satisfied with the normal
measuring needs.
2. Minimum
: Among one measurement
，
display the minimum value of
the current measured point. It is suitable for testing the curvature surface
or needs to get the minimum value which is widely used in the thickness
measurement of pipeline.
Note: it is not recommended to use this function when measuring cast
iron or alloy materials.
3. Difference
: display the accurate differential value between the
measured value and reference value set by the users, suitable for
quality check to identifying the qualified products whose thickness is in
the admissive error.
4. Limitation
: set the upper and lower limit, when the measured thickness
exceeds the preset limit, it will display and give alarm. This measurement
mode is more widely used than differential mode.
Summary of Contents for MiniTest 440
Page 8: ......
