Function
E-6
ElektroPhysik
curvature surface.
U10.0: Mainly used in the measurement of thin wall thickness and small
curvature surface.
U2.0: Mainly used in the measurement of coarse
particles such as cast
iron.
【
5.3
】
Treatment of the measured surface
When the surface to be measured is too rough or rusty heavily, please
perform the treatment according to the following methods:
1. Clean the measured surface by grinding, polishing or filing, etc. or use
coupling agent with high viscosity for that.
2. Use coupling agents on the work-piece surface to be measured.
3. Take multiple measurements around the same testing point.
6 Function operation
【
6.1
】
Switch on
Select the correct probe and insert it into the probe socket and then press
to switch on the instrument, the following screen displays:
If you did not insert the probe before switching on the instrument, the
screen will prompt you than “Please insert the probe”. At this moment
insert the probe into the socket and waiting to go to the measuring status.
Note: Please use the standard provided probe, otherwise the
instrument will does not work normally and displaying “Error”.
Summary of Contents for MiniTest 440
Page 8: ......
