ElektroPhysik
E-5
Display
The numeric portion of the display consists of 4 complete
digits preceded by a leading „1“, and is used to display
numeric values, as well as occasional simple words, to
indicate the status of various settings.
When the MINITEST 403 is displaying thickness
measurements, the display will hold the last value
measured, until a new measurement is made.
Note:
Additionally, when the battery voltage is low, the
entire display will begin to flash. When this
occurs, the batteries should be replaced
immediately.
These eight vertical bars form the Stability Indicator.
When the MINITEST 403 is idle, only the left-most bar
and the underline will be on.
When the gauge is making a measurement, six or seven
of the bars should be on.
If fewer than five bars are on, the MINITEST 403 is
having difficulty achieving a stable measurement, and
the thickness value displayed will most likely be
erroneous
