manualshive.com logo in svg

ElektroPhysik MiniTest 403, Technical Reference And Operating Manual

Share
Download
ElektroPhysik MiniTest 403 Technical Reference And Operating Manual Download Page 5

E-2

ElektroPhysik

1.2

Supply Schedule

   ·

Plastics carrying case

   ·

Gauge with transducer

   ·

1 bottle coupling fluid

   ·

2 x AA 1,5V alkaline batteries

   ·

Instruction  manual  (English/German)

   ·

Calibration certificate NIST 04-25-174-A and
04-28146-A

2.

Operation

The MINITEST 403 interacts with the operator through
the membrane keypad and the LCD display.  The
functions of the various keys on the keypad are detailed
below, followed by an explanation of the display and its
various symbols.

Introduction

2.1

Keypad

 

 

ON/OFF Key

This key is used to turn the MINITEST 403 on and off.
When the gauge is turned ON, it will first perform a brief
display test by illuminating all of the segments in the
display.

After one second, the gauge will display the internal
software version number.  After displaying the version
number, the display will show „0.000“ (or „0.00“ if using
metric units), indicating the gauge is ready for use.

Summary of Contents for MiniTest 403




























Reviews:

No comments

Brands by name

Popular brands

Load more brands