- 17 -
6.5 Welding-on threaded studs
With the
MULTISPOT M20
it is possible to weld on threaded
studs of 4, 5, 6 mm diameter.
Please use the appropriate contact pieces!
SB 4 for Ø 4 mm
SB 5 for Ø 5 mm
Insert appropriate contact piece (44) into welding gun (33).
Properly tighten union nut.
Insert threaded stud into contact piece (44) until limit stop.
Select "weld on studs" mode with keys CD.
Position welding gun (33) with the stud at the welding point
and press slightly.
Press and keep hold of button (34) of the gun until welding
program has ended. – (Time adjust with keys GH)
Threaded studs without collar can also be welded on. Use a nut
in place of a collar. The part to be welded should project from the
nut about 1 to 2 mm. Welding procedure as described above.
Summary of Contents for MULTISPOT M20
