MULTIMIG 200
Start-up
17
Fig. 20: Interval-welding deactivated
Press key 46, 50 or 51 to end menu and
return to standard display.
13.6 Characteristic line
Select characteristic line
Press key menu 48.
Set menu option „characteristic line“ by
turning operation knob 52.
Confirm menu option „characteristic line“ by
pressing operation knob 52.
Set required characteristic line by turning
operation knob 52.
Confirm characteristic line by pressing op-
eration knob 52.
Fig. 21: Characteristics
Press key 46, 50 or 51 to exit menu and
return to standard display.
If the graphic display shows „noP“ (no pro-
gram) for material thickness, the set welding
step is inapplicable for the selected
characteristic line.
Fig. 22: „noP“ (no program)
Select a suitable welding step with turning
knob 45.
13.7 Mode Manual
Manual welding mode allows welding inde-
pendent of characteristic lines.
Press key menu 48.
Select menu option „characteristics“ by
turning operation knob 52.
Confirm menu option „characteristics“ by
pressing operation knob 52.
Select menu option „manual“ by turning
operation knob 52.
Confirm menu option „manual“ by pressing
operation knob 52.
Press key 46, 50 or 51 to exit menu and
return to standard display.
Fig. 23: Manual mode
13.8 Secondary parameters