Elektron Analog Rytm Page 55 Manual Download

Page: 55 / 98

13. GLOBAL MENU

•

If MIDI+USB is selected in the INPUT FROM and/or OUTPUT TO settings, MIDI data

transfers will limit the USB speed. When sending or receiving large chunks of data,

make sure you use only the USB setting.

OUTPUT CH

selects whether the

[PADS]

and the knobs will send data on the auto channel or the track

channel.

PARAM OUTPUT

selects what type of MIDI messages the

DATA ENTRY

knobs will send. For information

about which CC/NRPN parameters that will be sent, please see “APPENDIX C: MIDI” on page 77.

• NRPN will make the knobs send out NRPN MIDI messages.
• CC will make the knobs send out CC MIDI messages.

ENCODER DEST

controls whether the

DATA ENTRY

and LEVEL knobs will send MIDI data or not.

When set to INT, no MIDI data will be sent. When set to INT + EXT, MIDI will be sent internally as well

as externally.

PAD DEST

controls whether the

[PADS]

will send MIDI data or not. When set to INT, no MIDI data

will be sent. When set to INT + EXT, MIDI will be sent internally as well as externally. When set to EXT,

MIDI will only be sent externally.

PRESSURE DEST

controls whether varying pressure applied to the

[PADS]

will send MIDI data or not.

When set to INT, no MIDI data will be sent. When set to INT + EXT, MIDI will be sent internally as well

as externally. When set to EXT, MIDI will only be sent externally.

MUTE DEST

controls whether activating/deactivating mutes will send MIDI data or not. When set to

INT, no MIDI data will be sent. When set to INT + EXT, MIDI will be sent internally as well as externally.

When set to EXT, MIDI will only be sent externally.

RECEIVE NOTES

will when active, make it possible to play Analog Rytm using an external MIDI key-

board.

RECEIVE CC/NRPN

will when active make it possible to control Analog Rytm parameters from an

external MIDI device sending CC/NRPN data.

13.5.3 MIDI CHANNELS

This menu handles the MIDI channel configuration.

TRACK 1-12, FX

selects dedicated MIDI tracks that will control the drum and FX tracks. An OFF set-

ting will make the track disregard any incoming MIDI messages.

PERF CHANNEL

selects the MIDI channel the knobs will send MIDI data on when PERFORMANCE

mode is active.

AUTO CHANNEL

selects the MIDI channel that will give access to the currently active track. If an

external MIDI keyboard connected to Analog Rytm sends MIDI data on this channel, the keyboard will

control the active track. This is useful when for example quickly changing between the active drum

tracks to play different Sounds.

PROGRAM CHANGE IN CHANNEL

selects the MIDI channel that will listen for incoming program

change messages. An AUTO setting will use the AUTO channel. Enable Analog Rytm to respond to

program change messages in the MIDI SYNC menu, covered on page 54.

PROGRAM CHANGE OUT CHANNEL

selects the MIDI channel that will send program change mes-

sages when changing patterns. An AUTO setting will use the AUTO channel. Enable Analog Rytm to

send program change messages in the MIDI SYNC menu, covered on page 54.

Summary of Contents for Analog Rytm



































































































Search results

Summary of Contents for Analog Rytm

Reviews:

Related manuals for Analog Rytm

Brands by name

Popular brands

Elektron Analog Rytm, Manual

Search results

Summary of Contents for Analog Rytm

Reviews:

Related manuals for Analog Rytm

Brands by name

Popular brands