Elektron Analog Four, Full Reference Manual

Page: 54 / 130

THE SEQUENCER
46
Individual tracks can be copied, pasted and cleared in the same way as patterns. To do so, GRID RECORDING
mode needs to be active.
A track page is one of the up to four pages of sequencer steps a pattern can consist of. It is similar to copy/
paste/clear a track, but will only affect the active track page. GRID RECORDING mode needs to be active here
as well. Select the track page that will be affected by pressing the
[PAGE] key. Copy by pressing [PAGE] +
[REC] . Select a new track page and press [PAGE] + [STOP] to paste. Undo by pressing [PAGE] + [STOP]
again. Press [PAGE] + [PLAY] to clear the active track page. Undo the operation by repeating the button
presses.
Copy the Sound of a synth track by pressing [TRACK] + [REC] . Select a new track to which the Sound will be
pasted and press [TRACK] + [STOP] to paste.
Trigs, complete with all parameter lock settings, can be copied, pasted and cleared as well. GRID RECORDING
mode needs to be active to access this functionality. Press and hold a trig and press
[REC] to perform the copy
operation. Paste by holding another [TRIG] key and pressing [STOP] . It is also possible to copy more than one
trig. Hold several trigs and press [REC] . The trig first pressed will act as the starting point. When pasting, the
other copied trigs will be placed in relation to this trig. Paste the copied sequence of trigs by holding another
[TRIG] key and pressing [STOP] . Clear trig locks by holding one or more trigs and press [PLAY] .
QUICK SAVE AND RELOAD COMMANDS
Kits, Sounds, tracks, patterns and songs can instantly be saved and reloaded. When reloading, settings will
revert to their saved state.
To quick save a kit, press [YES/SAVE] + [KIT] . This command is the same as the SAVE KIT command found in
the KIT menu, covered on page 19.
To quick save the track Sound of the active track, press [YES/SAVE] + [SOUND] . This command is the same as
the STORE TRACK SOUND command found in the SOUND MANAGER menu, covered on page 27.
To quick save a track, press [YES/SAVE] + [TRACK] . The operation is the same as the SAVE TRACK com-
mand, covered on page 46.
To quick save the active pattern, press [YES/SAVE] + [PATTERN] . The operation is the same as the SAVE
PATTERN command, covered on page 35.
To quick save a song, press [YES/SAVE] + [SONG] . The command is the same as the SAVE command found
in the SONG menu, covered on page 49.
To quick reload a kit, press [NO/RELOAD] + [KIT] . This command is the same as the RELOAD KIT command
found in the KIT menu, covered on page 19.
To quick reload the track Sound of the active track, press [NO/RELOAD] + [SOUND] .
To quick reload a track, press [NO/RELOAD] + [TRACK] . The operation is the same as the RELOAD TRACK
command, covered on page 46.
To quick reload the active pattern, press [NO/RELOAD] + [PATTERN] . The operation is the same as the
RELOAD PATTERN command, covered on page 35.
To quick reload a song, press [NO/RELOAD] + [SONG] . The command is the same as the RELOAD command
found in the SONG menu, covered on page 49.