Elektro Maschinen STEm 13070 E Industrie Line, Operating Instruction, Page: 35 / 64

Y+13?'001?//-6+-/%-4>8**'811?/+6-+1+'-3%[*/[/0'5/7%@+-6%-23?/3@&
'5%4^8&17/-1&0%01/57%@+-6%-%4^8&17/-1'55/>%+5&1'1?//-6+-/<%-42'8
*/1+158-0'5%0/Y7+-81/&<5/7/7[/51?%11?//]?%8&1%-4'1?/5>%51&Y+**6/1?'1'
-'11'83?1?/&/>%51&%&1?/&/7%2[85-2'8
%8*1 '&&+[*/3%8&/& /7/42
The unit does not
operate smoothly and
vibrates intensively
- Bolts loose
-Auger unit mounting loose
- Check bolts
- Check auger unit mounting
Engine does not run
-Throttle lever in wrong position
- Spark plug defective
- Fuel tank empty
- Fuel cock closed
- Check setting
- Replace spark plug
- Top up fuel
- Open fuel cock
Engine does not run
smoothly
- Bad Fuel
- Spark plug dirty
- Empty Fuel Tank and refill with Fresh Fuel
- Clean the spark plug
Drive power falls
- Clutch play too large
- Drive Belt loose or damaged
- Adjust clutch cable
- Replace Drive Belt
- Contact authorized customer service
The engine will not
start or dies after a
short period of time
-Choke in wrong position
- Spark plug Fouled
- No fuel
- Check Choke setting
- Clean or replace spark plug (electrode spacing
0,6 mm)
- Top up fuel
Inadequate or no
ejection
- Snow ejection until blocked
- Plow screw not turning
- Shear pins (Fig.11/Item 26)
sheared
- Clean the snow ejection unit with a solid object
- Adjust Auger clutch cable
- Replace shear bolts or contact authorized
customer service
The snow is not
removed fully
- Sliding shoes maladjusted -Adjust the sliding shoes (Fig. 13)
EN