13
Instruction Manual
PS 800 R Series
EN
Date: 07-22-2014
About
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +49 2162 / 37850
Fax: +49 2162 / 16230
Web: www.elektroautomatik.de
Mail: [email protected]
© Elektro-Automatik
Reprint, duplication or partly, wrong use of this user
instruction manual are prohibited and might be fol-
lowed by legal consequences.
Dangerous voltage
Caution:
The output voltage can rise to dangerous
levels (> 60 VDC)!
All live parts have to be covered. All actions at the
output terminals have to be done while the unit is dis-
connected from the mains and may only be executed
by personnel which is instructed about the hazards
of electrical current. Any connection between the
load and the unit (at the output terminals) have to
be scoop-proof. Applications connected to the power
output must be configured and fused in a way that
prevents the use of these to cause a damage to the
unit by overload or malfunction.
Safety instructions
• The cross section of the load leads has to match
the nominal current of the device.
• Avoid any damage to the device, do not insert
metal parts through the slots, do not obstruct the
slots!
• Mains connection must only be done by trained
technical personnel.
• Mains connection only with appropriate leads and
under adherence of common safety measures.
• Avoid direct sunlight and humidity.
• The DC output must be covered in order to prevent
injury by dangerous voltages!
