© EA Elektro-Automatik in 2022, this information is subject to change without notice
61
06230920_manual_ps_10000_3u_15kw_en_01
►
How to configure the thresholds of the adjustable device alarms
1.
While the DC output is switched off tap the touch area
on the main screen.
2.
In the menu tap on group
Protection
. On the right-hand side of the screen it will list all device alarms with their adjust-
able thresholds. These are permanently compared to the actual values of voltage, current and power on the DC output.
3.
Set the threshold for the protections relevant to your application if the default value of 110% is unsuitable.
The user also has the possibility of selecting whether an additional acoustic signal will be sounded if an alarm occurs.
►
How to configure the alarm sound
(also see
“
“3.4.3. Configuration via the menu“
1.
Swipe with your finger up from the bottom edge of the screen or directly tap on the bottom bar:
2.
The quick menu will open. Tap on
to activate the alarm sound, or on
to deactivate it.
3.
Leave the quick menu.
