elektraLite Warm White Dazer, User Manual, Page: 7 / 14

13. SET.
(Set has several Sub Menus which allow functions to be used).
1).
REST
This resets all values to their default.
Using the Menu button, go through the Root Menu until
SET
. Press Enter and then use the ↑ or ↓ buttons to get to
REST
.
Press Enter. The display will have 4 dots across the bottom. The password needs to be entered. The password is the
following sequence using the
↑ and ↓ buttons.
↑ ↓ ↑ ↓ then press Enter once, to complete the reset. The display will read "OK" followed by a return to the REST sub
menu. The Menu button will need pressing to return to the Root Menu. Only when at the Root Menu will dmx control work.
Please note the Reset also takes the dmx address back to 001.
2).
DIM
The Dim function allows different Dimmer curves to be chosen. There are 5 choices.
Choice 1 :- this is Dim off. The Dimmer curve is 0 which means any change in dimmer level is instantaneous.
Choice 2:- Dim 1. The dimmer curve has the shortest fade in and fade out time.
Choice 3:- Dim 2. The dimmer curve has the 2
nd shortest fade in and fade out time.
Choice 4:- Dim 3. The dimmer curve has the 3 rd shortest fade in and fade out time
Choice 5:- Dim 4. The dimmer curve has the longest fade in and the fade out time.
Using the Menu button, go through the Root Menu until
Set
. Press Enter and then use the ↑ or ↓ buttons to get to
DIM
.
Press Enter and then use the ↑ or ↓ buttons to get to the DIM choice required. Once chosen, press Enter to save it and then
use the Menu button to exit back to the root directory.
3).
DV
The
DV
setting allows the ability of the leds to not flicker when using video camera.
The choices are NTSC or PAL. NTSC is the USA system.
Go through the Root Menu until
Set
. Press Enter and then use the ↑ or ↓ buttons to get to
DV
.
Press Enter and then use the ↑ or ↓ buttons to get to either NTSC or PAL. Once chosen, press Enter to save the setting and
the Menu to exit back to the Root Menu.
14. KEY
The Key function is an access password for the fixture. The
KEY
can be turned OFF or ON which then deactivates or
activates the password.
To set the
KEY
go through the Root Menu until
KEY,
press Enter and use the
↑ or ↓ to set the
KEY
to either OFF or ON. If the
Key
is turned ON then a password is required to go into sensitive Menus and to change functions.
The password is ↑ ↓ ↑ ↓ (Up + Down + Up + Down)
15. Glass front plate.
Certain fixtures come with a glass plate. This glass plate fits onto the front of the leds. It slots in the gel frame holder and the
clip latches the plate into position.