elektraLite eyeBall (5-in-1) User Manual Download Page 2 | Manualshive

Page: 2 / 16

elektraLite eyeBall (5-in-1) User Manual Download Page 2

1. Unpacking

Thank you for choosing the

ElektraLite eyeBall

RGBWA (5-in-1)

fixture. For your own safety, please

read this manual before installing the device. This manual covers important information on installation
and applications. Please keep this manual for future reference.

ElektraLite eyeBall (5-in-1)

wash fixture uses 7 high powered 12 watt quad leds, giving incredible

output. Please unpack the

ElektraLite eyeBall (5-in-1)

carefully and check whether it was damaged in

shipping.
The following item should be in the box with the fixture:-

2 part yoke

2 knobs for yoke

1 DMX 5 pin cable

1 Turnaround 3 to 5 pin cable
1 Turnaround 5 to 3 pin cable

1 IEC power cable

1 IEC jumper cable (for daisy chaining the power between fixtures)

Please handle the fixture with care at all times. Do not drop. Do not hit the front lens assembly.

2. Safety Instructions.

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.

ElektraLite eyeBall (5-in-1)

is a high voltage fixture. Be careful

when dealing with high voltages.

Please read this manual. If you do not read this manual and damages occur to the ElektraLite
eyeBall (5-in-1), then it could void the warranty.

During shipping, the

ElektraLite eyeBall

(5-in-1)

may have been exposed to high temperature

changes or humidity changes. So, as a precaution, do not switch the

ElektraLite eyeBall

(5-in-1)

on

immediately. Condensation can damage the

ElektraLite eyeBall (5-in-1)

so leave

the

ElektraLite

eyeBall

(5-in-1)

switched off until it has reached room temperature. The

ElektraLite eyeBall (5-in-1)

is an

INDOOR

operational fixture. Do

not

operate this fixture

outdoors

or anywhere there is high

humidity.

The electric connection must carry out by a qualified person and it is absolutely essential that

the

ElektraLite eyeBall

(5-in-1)

be

grounded

. So under no circumstances break off the ground pin on the

Edison plug or use the fixture where a ground is not present. A ground pin, like the fuse for the

ElektraLite eyeBall (5-in-1)

is there for safety.

Always disconnect the

ElektraLite eyeBall

(5-in-1)

from the power source, when the fixture is not in

use or before cleaning it. Only unplug

ElektraLite eyeBall

(5-in-1)

from the power source holding onto

the Edison plug. Never pull out the Edison plug out by just pulling on the power cord itself.

Please keep the

ElektraLite eyeBall (5-in-1)

away from children and the general public. Please be

intelligent and use common sense when operating the

ElektraLite eyeBall (5-in-1).

«
1
2
3
4
...
»

Summary of Contents for eyeBall (5-in-1)

















Reviews:

No comments