8
X- Mechanical Lock : There are Two Mechanical Locks and they are same
Y- Infrared (Transmitter) & Adjustable Light Intensity LED Illumination Module
2.1 Product Trays
Filling up the Vending Machine and Placing the Products to the Trays
The vending machine has 12 Trays (standard). In the machines
with an optional cooling unit, products requiring cooling can be
placed in the bottom tray. To avoid any damage, place any
breakable products into the trays close to the compartment.
To load products to the trays:
Adjust the spiral to drop the product in an easy way by
pulling the spiral forward, turn and let go.
Start placing the products in the slots between Spiral
Steps.
Place only one product in each slot.
Select the correct spiral steps for your products
Use Aluminum Magnet Guides on both sides of the Spirals to
provide a successful vending.
It is possible to change the spiral steps, sizes and loading
capacity, depending on the available spiral types. Maximum
number of trays can be 14 (Optional).
WARNING:
Placing the products incorrectly may cause
failure during dispensing the products.
2.2 Control Panel
All operational controls can be followed on the Graphic LCD
Screen, Payment System and Touchpad Keypad are installed on
this panel.
2.2.1 Touchpad Keypad
It used for Selecting Products and Vending Machine Settings. It
has been explained in details under programming section. IP 65
Weather-proof Anti-vandalism Metal Keypad is Optional.
2.2.2 Graphic LCD Screen
All the operations are being displayed on the Graphic Liquid
Crystal Display-GLCD for easy usage. Will be referred as GLCD
thereafter.
