background image

  

 

25

 

Useful Information; 

 

 

Open the cooling unit from behind and check if the compressor unit is in operation. 

 

 

Visually check if the compressor fan is operating. 

 

 

There is a pipe connected with a valve on the Compressor to be used for gas filling. 

 

 

The fan throws out the heated air over the compressor. If the fan does not function 
the compressor may malfunction due extreme heat.  

 

 

The Vending Machine automatically stops the Cooling unit for 10 minutes every 4 
hours cycle to avoid frost and extreme use of the cooling system. Defrost 
mechanism comes on at this point. 

 

 

If the front door rubber gasket is out of its place, the front door is opened quite 
often, remains opened for long durations or if there is direct sunlight to the machine, 
the evaporator may become covered with frost and the cooling stops. 
 

The Cooling Module has a modular design. The single piece plug in 
type Cooling Unit can be installed on a standard  

Maxi-Buffet

®

 

at first 

use or at a later time. 

 
 

9.2 Additional Tray / Canned Drink Dispenser 

Maxi Buffet has 6 Standard Trays with the possibility to add 1 Optional Tray. The design of 
the mechanical structure allows later additional installation. 
 
Special design and adjustments can be made as per the buyer’s request to vend different 
packing size/shape products requiring different storage conditions other than the standard 
configuration. 

 
9.3 GSM/GPRS Remote Access 

The offered optional GSM/GPRS module provides remote access to all Vending Machine 
statistical data and product availability / storage condition of the machine. The operators 
can perform Price Settings and Discount Menu Settings etc. controls via Remote Access. 

 
 
9.4 Optional Heating /Conditioning

 

  

 

The optional heating unit can enable the Maxi-Buffet to vend products that may need 
heating. These can be bakery products such as pastry, bread loafs, bagels and/or products 
needing to be stored at a certain hot temperature level. Please contact our Sales 
Department for inquiries. 

 
10. TROUBLESHOOTING 
 
10.1 Warnings 

Maxi-Buffet

®

 

must be taken into operation only after all necessary precautions and 

instructions in this User’s Manual are fulfilled. Misuse of the Vending Machine may cause 
malfunctions and/or harm to the environment and humans.  
 
The Maxi-Buffet is recommended to operate in fixed vertical position. 
 
Periodically check the operation of the 

Maxi-Buffet

®

.  

 

Summary of Contents for TRU-VEND Maxi-Buffet






























Reviews: