ELEKTRA SelfTec DW, Installation Manual

Page: 6 / 67

After a cable segment has been cut off, the
cable remaining on the spool also needs to be
secured with a heat-shrink cap.
The cables need to be terminated with a joint
and connected to the power supply conductor.
For this purpose, the EC-PRO and ECM25-PRO
joint sets have to be applied (installation manuals
included in the sets).
Due to their properties, ELEKTRA SelfTec DW /
DW F can touch or cross and they are not prone
to local overheating. A significant advantage is
the possibility to cut the cables into segments of
required length.
- ELEKTRA SelfTec DW has a double-layer
sheath of halogen-free polyolefin and
LDPE certified for drinking water
applications
- ELEKTRA SelfTec DW F has a single-layer
fluoropolymer sheath suitable for drinking
water applications
• ELEKTRA SelfTec DW / DW F 10
- in 10°C on the pipe – 10 W/m
- in the ice water – 16 W/m
• ELEKTRA SelfTec DW F 16
- in 10°C on the pipe – 16 W/m
- in the ice water – 22 W/m
®
®
®
®
®
However, it is recommended
not to exceed the max. permissible heating
circuit length, as shown in Table 1.
Product features:
Technical parameters:
6
SelfTec DW/DWF
®
ELEKTRA