ELEKTRA SelfTec 16 ready2heat, Installation Manual

Page: 15 / 54

Protect the joining spot of the gutter and downpi-
pe with a flexible cable support to prevent
possible damage to the cable.
When using the wire with clips in the downpipe,
suspend it on the support bar.
• support bar DSW-SB-1
• flexible cable support
FCS-1-SS
1
2
1
2
Operation
The system runs after the hermetic plug has been
connected to the mains. Self-regulating heating
cables are characterised by changeable heating
power depending on ambient temperature. The
lower the temperature, the higher the heating cable’s
power, and thus the amount of heat generated. Even
though the cables are self-regulating, they operate
also in ambient temperatures above 0°C and charge
certain amount of electric energy.
To eliminate electric energy consumption in ambient
temperatures above 0°C, disconnect the power
supply of a self-regulating heating cable.
15