ELEKTRA SelfTec 16 ready2heat, Installation Manual

Page: 10 / 54

ELEKTRA
SelfTec
®
16
ready2heat
Installation on pipes
• ELEKTRA SelfTec
®
16 ready2heat self-regula-
ting heating cable should be selected matching
the pipe’s length according to table 1,
• The heating cable should be mounted along the
pipeline in its bottom part with self-adhesive
installation tape fixed every 30 cm. If, basing
on the table, the selected cable is longer than
the heated pipe, the cable should be installed
spirally,
• For plastic pipelines, install self-adhesive alumi-
nium foil on the pipe before fixing the heating
cable. This will improve the temperature distri-
bution on the surface of the pipeline,
10