ELEKTRA ELEKTRA DM, Installation Manual

Page: 14 / 84

14
If the heated area is not adjacent to the
temperature controller and the protective
conduit is extended into the floor for more
than 1.0 m, it may be necessary to install an
additional installation box close to the floor.
Such solution would facilitate the easy
exchange of the temperature sensor.
A draw wire is a flexible wire positioned
inside the protective conduits which helps
feeding the floor sensor cable together with
the cold tails into the deep installation box
easily, just after the plastering or laying
the tiles.
Do not bend the flexible protective
conduits at 90° angle at the junction of
the wall and floor - keep the curve shape.
The curve shape of the protective conduits
guide would enable the easy exchange of
the temperature sensor, if required.
Caution:
Heating Cables
ELEKTRA