Eleiko 3085601, Instruction Manual

Page: 61 / 64

3085570 p6
Plastic Protection
3085570 p38
Plastic Roller
2001345
Knurled Knob
2001445
Spring
3085466 p17
Plunger Pin
2001624
Locking Nut M10
- 61 -
PREVENTIVE MAINTENANCE AND INSPECTIONS
NOTE: The safety level of the equipment can only be maintained if it is examined regularly for damage and wear.
Regularly:
· Clean surfaces on the frames and tubes from dust and dirt.
· Check that all bolts between parts, walls and floors are properly tightened, according to
recommendations.
· Check equipment for sharp edges. Replace parts with sharp edges.
See also www.eleiko.com.
SPARE PARTS AND SERVICE
The following components are parts that are not listed in the list of components section. They may however need to
be replaced eventually. The rest of the components can be found in the list of components section.
Contact Eleiko for spare parts and service:
Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: info@eleiko.com | Phone: +46 35 17 70 70
www.eleiko.com
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in
workmanship and / or materials under normal use or service as follows:
· 5 years on structural moving parts.
· 3 years on bearing, bushings and pulleys.
· 1 year on cable and accessories.
CARE AND MAINTENANCE