6. Troubleshooting
Fault
Possible Cause
Solution
Light on, motor
doesn’t work
Fan switch turned off
Select a fan switch
position.
Fan switch turned on
Contact service center
Light and
motor doesn’t
work.
House fuses blown
Reset/replace fuses.
Plug isn’t plugged in
Plug in the plug.
Plug is plugged in
Please try another
socket.
Oil leakage
One-way valve is
blocked
Check the one-way
valve and deblock.
Light doesn’t
work
Lamp is broken
Check: replace lamp
bulb
Insufficient
suction
To many bends or to
big
Check: installation of the
exhaust pipe
The distance between
the cooker hood and
the cooking top is too
far
Check: installation
U use a charcoal filter
Please keep in mind that
the suction power will be
lowered when using a
charcoal filter.
You reduced the size
of the exhaust pipe
Please try to maintain
the original size.
NOTE:
Any electrical repairs to this appliance must conform
to your local, state and federal laws. Always disconnect the
unit from the power source when opening the unit. Please
contact the service center if any
doubt or if above solutions didn’t help.
