Electrovision Ltd., Lancots Lane, Sutton, St Helens, Merseyside WA9 3EX www.electrovision.co.uk
SETTING THE TIMER
Making sure all the segments are pulled up (normally off position) select the time
you would like the unit to switch on and push this segment down using a small flat
bladed screwdriver or similar tool. Working anti-clockwise push down further
segments stopping when you have reached the time you would like the product to
switch off. The example opposite (fig.1) shows the timer switching on at 10 and
switching off at 11. Further settings can be made using the same procedure. On
the side of the product is a three position switch marked as below. To make the
timer work the side switch must be set to “Auto”.
SETTING THE CLOCK
Rotate the clock face until the correct time matches up with the arrow on the clock face. It is best to set the time on the hour for the best
results. PLEASE NOTE THE CLOCK ONLY WORKS WHEN PLUGGED IN, The example above (fig. 1) shows the clock set to 11 O’clock.
The unit can now be plugged in and used.
SPECIFICATIONS
Voltage 230V @ 50 Hz
Power: 3000W Max
Amps : 13A
fig. 1
SETTING THE SWITCH ON THE SIDE OF THE PRODUCT (see fig. 2)
On = Switches the unit on and overrides the timer.
Off = Switches of the unit and overrides the timer
Auto= Uses the timer settings to switch the unit on and on.
fig. 2
