ASSEMBLY INSTRUCTIONS
1
4
3
2
Place the glass top (A) upside down on the
floor, please ensure it is placed on a firm
soft surface that annot damage the glass.
Take the 4 bolts rods (F) and screw them
into the underside of the glass as shown
above.
Take the 4 top tubes (C) and slide them over
the bolt rods (F).The with no plastic spacer
are fitted first to slot onto the raised caps on
the underside of the glass top
Take one of the glass shelves (B) and slot
it over the bolt rods as shown, it should sit
comfortably on the top tubes. Make sure
the smooth shiny side is facing downwards.
This will be facing upwards when the table
is turned the correct way up.
Take the 4 middle tubed (D) and slide them
over the bolt rods.