QSABM0818 3
4. Alarm Enable / Disable
From monitor mode
a. Press and Hold LIMIT button
LMIT
is now flashing
b. Short press the LIMIT button until you scroll through to “SYS”
SYS
and the software version is displayed
c. Press and Hold LIMIT button
AC Y/N
will be displayed in the lower readout
d. Use the UP /DOWN buttons to enable or disable the system alarms
shown above and short press the LIMIT button to scroll through
e. To exit press and hold LIMIT button -> goes back to SYS, short press
LIMIT button -> goes to CAL, short press LIMIT button -> goes to
LMIT
,
long press (approx. 4 sec) LIMIT button -> goes to monitor mode
5. Address and Baud Rate change
a. Repeat step 2 a, b and c above
b. Short press the LIMIT button until you scroll through to “SYS”
SYS
and the software version is displayed
c. Short press the LIMIT button to scroll through to
ADDR
and use
UP / DOWN buttons to select the address
d. Short press the LIMIT button to move to BAUD and the UP
/DOWN button to select the baud rate
e. To return to monitor mode long press the LIMIT button