Electrorad 4 Zones RF Programmer, Installation & Operation Manual, Page: 12 / 48

2.3.3 RF Installation with Control conductor
receiver
a) Firstly, program all the Control Conductor receivers
which are required to work in the same zone in “
RF
init ” mode.
For this, press the Receiver button for 5 seconds, the
Green RF LED should light up (fixed) indicating that
the Receiver is now in radio configuration mode
waiting for the programmer configuration address.
b) Now on the programmer, enter the installer menu by
pressing the
( ) button for 8 seconds, where the
following screen will be display.
12
…
5s