Electrorad 4 Zones RF Programmer, Installation & Operation Manual, Page: 11 / 48

c) On the radiator controller, press and hold the “OK”
button for 5 seconds to enter the Set-Up menu. “rfi”
will be displayed, then press “OK” again to enter the
radio frequency initialization (rfi). The screen will flash
“rf.un”, select this option by pressing “OK”
PLEASE NOTE: The above process is quick. It will
briefly display “-“ on the screen then will quickly revert
back to the home screen.
The radiator controller is now paired with the
programmer.
d) The radiator controller is now linked and ready to work
with the programmer.
- Once the configuration between the radiator
controller and the programmer is made, repeat step (c)
to link all the radiator controllers, which are to be
connected to the same zone.
- Repeat the step ( b ) to ( d ) to include more zones on
the installation.
e) On the programmer, press ( ) button 3 times to
return to the home screen.
11