background image

 

6-1

6 WARRANTY 

 

1. 

Electrophysics warrants that these products to be free 
from defects in material and workmanship. Any 
warranty described herein shall extend to the first 
ultimate user only for a period of one year from the date 
of shipment from our factory. 

2. 

Electrophysics' obligation under this warranty shall be 
limited to furnishing a replacement for, or at our option, 
repairing any part which, to our satisfaction, proves 
defective, provided such part is returned to the 
Electrophysics service facilities in New Jersey, freight 
paid. No product may be returned without prior 
Electrophysics approval (see below). 

3. 

Electrophysics shall not be responsible for installation 
costs. In no event will any claim for labor in removing 
or replacing defective parts or for incidental or 
consequential damages be allowed. 

4. 

No warranty is made on products that have not been 
installed, operated or maintained in accordance with 
these instructions, or which have been subjected to 
misuse, abuse, accident or alteration or to improper or 
negligent use, maintenance, storage, transportation or 
handling. 

5. 

Products not manufactured by Electrophysics which are 
sold by Electrophysics are covered exclusively by the 
original manufacturer's warranty and Electrophysics 
may, at its option, assign to Buyer its warranty claims 
against the original manufacturer of defective products 
in full settlement of Buyer's possible claims against 
Electrophysics with regard to such products. 

6. 

Where Buyer is a distributor, financing company or 
similar entity acting for or on behalf of the initial user of 
the equipment, the warranty is transferable to the initial 
user only. In all other cases, the warranty is limited to 
the Buyer and is not transferable unless agreed to in 
writing by Electrophysics. 

7. 

The Warranty contained herein is exclusive and 
expressly in lieu of all other warranties, written, oral, 
implied or statutory, including but not limited to 
expressed or implied warranties of merchantability or of 
fitness. In addition, Electrophysics shall not be liable for 
any loss, damage or injury of any nature, whether direct, 
indirect or consequential, in connection with or resulting 
from use of the products. 

 

6.1  HOW TO RETURN PRODUCTS 

FOR WARRANTY REPAIR 

 

1. 

Refer to the contact information for repairs and service. 

2. 

A Return Authorization (RA) number will be assigned 
by the service department. This number must be marked 
clearly on the outside of the package being returned. 

3. 

Service department will provide a shipping address. 

Summary of Contents for AstroScope 9350
























































Reviews: