User Manual
17
© Electronic Systems Protection, Inc. / 03.08.13 / espei.com
/
nextgenpcs.com
5. Voltage Limit Selection
a. Navigate to
“Setup/Voltage Limits” in the menu.
b. The Voltage Limit selection screen will appear with the currently active limits selected:
c. To change the limits, check the boxes beside the desired values and press
“Save
Limits”.
d. When the new limits have been successfully saved in the
Next Gen PCS Filter, the following message will be
displayed:
e.
Press “OK” to complete the voltage limit selection process.
6. Cycle Power Command
a. In addition to basic On/Off outlet control, the Next Gen PCS Diagnostic Software
includes the ability to execute a power cycle.
b. When commanded, the outlets will turn Off, then back On, after a 90 second delay
time.
c. To perform a power cycle,
navigate to “Tools/Cycle Power” in the menu. The software
will explain that performing a power cycle will turn off power to connected equipment
for 90 seconds.
Press “Ok” to continue, or “Cancel” to cancel.
d. During the cycle, a progress bar will appear which will indicate the time until the
outlets are turned back On:
e. While the Next Gen PCS Filter is performing a power cycle,
its LCD EVENT MONITOR will display
“cYc” instead of “On”
or
“OFF”:
Summary of Contents for NEXT GEN PCS 120
Page 2: ......
