Modern bicycle and E Bike technology is high tech. Working on bicycle and E Bike parts therefore requires
special knowledge, experience and specialist tools. Please do not attempt to work on the bike yourself.
Give your bike to a specialist retailer for repair, servicing and maintenance. Contact us directly for repair,
servicing, and maintenence of your Electron Wheel™.
Check that all quick releases are safe and secure every time you ride after your bike was unused,
even for a short period of time! Regularly check that all bolts and components are secure.
Never
ride with your hands off the handlebars.
Electron Wheel™ recommends use on bicycles only that meet all legally applicable standards including
Consumer Product Safety Commission Standards (found at 16 CFR Part 1512) and/or ISO 4210:2014.
Before installing the Electron Wheel
™
system, check to see whether your bicycle is suitable for it. In
particular, there must be sufficient stability provided for. Consult your bicycle specialist for advice
when in doubt.
ENSURE CORRECT INSTALLATION
Follow all steps listed in this manual and in the assembly video provided on the mobile app and online.
Failure to follow these instructions or skipping any steps could result in operational failure, wheel damage,
voiding of the warranty, or rider injury.
BICYCLE FORK
Installing and using the Electron Wheel
™
on a bicycle fork that has been previously damaged may result in
failure, resulting in injury or death. If you believe that your bike fork may have been previously damaged from
an accident or misuse, consult your local bike shop before installing the Electron Wheel™.
The Electron Wheel
™
can only be used with metal frames. Bamboo, carbon fiber and other frame
materials have not been tested for use with the Electron Wheel
™
.
CHECK YOUR BRAKES
It is critical that the rider maintains front and rear brakes to optimal condition. Failure to do so, or improper
installation, can lead to serious injury or death.
It is recommended that the rider tests all brake mechanisms before turning on the Electron Wheel
™
. Ensure
that all cables have been reconnected and brake pads contact the rim.
5