background image

PREPARATION  FOR  USE

AC Plug

AC Outlet

Unpacking and Setup

  

Carefully remove the unit from the display carton and remove all packing material from the unit itself.

  

Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not

   remove any labels located on either the back or bottom cabinet of the unit.

  

The detachable AC power cord is packed in the carton separately from the unit.  Make  sure  that  the

  AC power cord is not accidentally discarded with the carton or packing material.

  CD  open  compartment  door.  There is  a  white  card in the   CD   compartment which is intended   to 
  prevent   the  CD  pickup from   moving  during   shipment   of   the   product.   Remove  this card from  
  the  CD  compartment before use.

Power Sources

This portable audio system is designed to operate on either AC 120V  60Hz house current or  12V  DC,
using 8   D   batteries (UM-1), not included. Attempting to operate this unit from any other power source
may cause damage to unit, which is not covered by your warranty. 

AC Operation

Unwind the AC cord and extend it to its full length, Insert the small end of the AC cord into the AC socket
on the back cabinet of  the unit. Insert the other and of the  AC  cord  into  any convenient AC 120V  60Hz
household outlet .

-2-

Summary of Contents for RCD 310E








Reviews: