Electron Octatrack MKII, Quick Manual

Page: 19 / 32

19
6. Up to six track parameters. They show what the DATA ENTRY knobs control and also
indicate the current parameter values. When two parameters are related to each other
in some way, they will have a small “clip” between them as shown below:
7. Assigned scenes and the current position of the crossfader.
8. Graphics that indicates which TRIG mode that is currently active.
9. Info about which TRACK PARAMETER page is active.
10. Info box where the name of the active part and the name of the sample assigned to the
machine of the track is shown.
11. The currently active pattern.
4.1 SCREEN NAVIGATION
Use the [ARROW] keys [UP] , [DOWN] , [LEFT] or [RIGHT] to navigate menus or
sub-menus. The LEVEL knob can also be used to scroll through menus and lists.
[YES] is used to affirm, select, enter sub-menus and tick/untick boxes.
[NO]
is used to negate, deselect or go back one or more steps.
4.2 PARAMETER EDITING
The DATA ENTRY knobs are used to change the values of the track parameters. The po-
sitions of the parameters on the screen correspond to the physical locations of the knobs
on the front panel.
4.3 PARAMETER VALUE JUMP
If you press [FUNC] when you edit certain parameters, then the parameter values jump to
appropriate positions. The Delay time, for example, doubles and halves the value, while the
sample tuning will jump in whole octaves.