Electron Machinedrum SPS-1, User Manual

Page: 34 / 120

THE ROUTING PAGE
26
•
The LEVEL overall gain control can not be locked or controlled by an LFO.
Instead, use the VOL parameter.
PAN
Here you control the stereo pan for the main stereo outputs. The default value is 0, which
places a sound in the center. When a track is assigned to an individual output, the PAN
parameter has no effect.
PAN positions the sound in the stereo field. A value of -64 will pan the sound hard left, a
value of +63 will pan the sound hard right.
•
To get a more spacious sound, try to spread out the tracks in the stereo field using
the PAN parameter. Note though that the normal placement of the bass drum is
almost always in the center.
DELAY SEND
This is a send to the RHYTHM ECHO DELAY of the STEREO MASTER EFFECT system.
When a track is assigned to an individual output, no delay will be applied to the sound.
DEL controls the amount of signal that will be sent to the RHYTHM ECHO delay.
See page 29 for more information on the RHYTHM ECHO delay.
REVERB SEND
This is a send to the GATE BOX reverb of the STEREO MASTER EFFECT system. When
a track is assigned to an individual output, no reverb will be applied to the sound.
REV controls how much signal will be sent to the Machinedrum GATE BOX reverb.
See page 30 for more information on the GATE BOX Reverb.