Electron DMR.732 User Manual Download Page 4

DIN RAIL TRAILING EDGE DIMMER – DMR.732 & DMR.733 

User Manual.                                                                                                                            

(Ver.03)

 

 

 

ELECTRON S.A.

 

 

7 klm National Road Athens - Lamia, 68 Antiohias Str, 

PROFESSIONAL LIGHTING SYSTEMS

 

 

N. Philadelphia, 143 41 Athens, Greece 

[email protected], www.electron.gr 

 

Tel. +30 210 2584240, Fax. +30 210 2584245 

Technical specifications. 

 

Output channel. 

1. 

Maximum output power. 

350 VA. 

Minimum output power. 

0 VA. 

Minimum connected load. 

5W. 

Dimming mode. 

Trailing edge. 

Type of loads. 

Dimmable 230V LED lamps. 

Dimmable compact fluorescent 

lamps. (CFL). 

230V halogen lamps. 

Electronic transformers for low 

voltage halogen lamps. 

Incandescent lamps. 

Analog inputs. (DMR.732) 
Analog inputs. (DMR.733) 

1/10V & Push button.           

Push button. 

Wireless input. (DMR.733) 

Bluetooth. 

Wireless range. (DMR.733) 

Up to 30m.

Dimming curve correction. 

Yes. Adjusting the built-in min 

trimmer, installer can achieve 

dimming without dead fields. 

Dimming resolution. 

20000 steps. 

Input / output connection. 

Screw terminals. 

Output current. 

1.52A rms. 

Output voltage 

230VAC. 

Output power 

350 VA. 

Dimmable. 

Yes. (Phase cut) 

Power consumption. 
(Max. load @ 100%). 

352 W. 

Power supply. 

230VΑC, 50Hz. (+/- 15%) 

Class. 

Class II. 

Ambient temperature. 

-20

C / +50

C. 

Dimensions (LxWxH). 

90mm x 36mm x 58mm. 

Conductor size. 

Power Supply & Dimmer output 

: 1mm²-2,5mm² (stranded). 

Input, output controls : 0,5mm²-

1mm² (stranded). 

Standards in compliance. 

LVD Directive, EMC Directive. 

1

Range is highly depended on the surrounding and obstacles, such  

 as walls and building materials. 

 

ELECTRON  S.A.  has  every  right  to  make  any  change  to  this 
document without informing anyone. 

 

Dimensions. 

 

 

Connection diagram. 

 

 

 

Minimum  spacing  at  the  rail  between 
dimmers and other components. 

 

1)  Load up to 200VA          2) Load from 200VA to 275VA 

 

 

 

3) Load from 275VA to 350VA 

 

 

Caution:  Leaving  no  gap/space  between  the  dimmers 
(for cases 2 & 3) and other components in the rail, might 
damage the dimmer(s) permanently! 

 

 
 

 

At  the  end  of  its  lifetime  DMR.732  &  DMR.733  must  be 
delivered  in  a  special  waste  collection  center.  The 
improper  disposal  can  cause  damages  for  the 
environment and poses dangers for the human health.

 

Summary of Contents for DMR.732

Page 1: ...power factor is smaller than one Please refer to the technical specifications of the loads to learn more about the current they consume Compatible loads Dimmer DMR 732 DMR 733 are operating with Trailing edge mode and therefore the loads should also operate with the same way of regulation If your loads don t indicate the dimming mode contact your supplier to inform you on this The types of loads y...

Page 2: ...level and with the same direction down Dimmer s operating mode DMR 732 DMR 732 is operating in LAST mode LAST takes precedence or aller retour The dimmer is detecting the input that changed last and modifies the control level of the output accordingly For example we suppose that the Push button input has 70 level and is currently controlling the output If the level of 1 10V input changes by more t...

Page 3: ...vior of the lamps at low dimming areas The regulator is located at the center of the device and it is marked as MIN ADJUST Furthermore when you connect to the output different types of lamps and you notice that by rising the control signal of the dimmer from 0 each type of lamp starts to light up at different percentage of the control signal Then you can set the minimum output percentage with the ...

Page 4: ...n Screw terminals Output current 1 52A rms Output voltage 230VAC Output power 350 VA Dimmable Yes Phase cut Power consumption Max load 100 352 W Power supply 230VΑC 50Hz 15 Class Class II Ambient temperature 20 C 50 C Dimensions LxWxH 90mm x 36mm x 58mm Conductor size Power Supply Dimmer output 1mm 2 5mm stranded Input output controls 0 5mm 1mm stranded Standards in compliance LVD Directive EMC Di...

Reviews: