31
9.3 CV Track
The CV Track parameters will change depending on what the CV Configuration for each
channel is set to. Typically the parameters that are common are TUN / FIN for Course and Fine
Tuning, VAL, Voltage Level of CV (Value Lin), SRC, Notes for Sending to CV Output.
Selecting CV Track
1. Select [CV] i.e. CV Track
2. Select [CV x] where x is the channel, A,B,C or D for the selected CV
channel. Parameters shown will change depending upon CV Config.
Assigning Tracks to CV Output
1. Select [CV] i.e. CV Track
2. Select [CV x] where x is the channel, A,B,C or D.
3. Adjust (E) Controller for assigning Track 1-4, FX or CV to CV Output
Identifying Output Connection
required
1. Select [CV] i.e. CV Track
2. Select [CV x] where x is the channel, A,B,C or D.
3. Plug indicator at the bottom of display shows the Tip or Ring flashing
showing how the connection will send CV/Gate signals
10. Other I/O
Installing KITS using SYSEX
Requires connection to external Sysex source i.e. PC or MAC via MIDI /
USB MIDI and a SYSEX File Utility e.g. Elektron’s C6 SysEx Tool
1. Select [FUNCTION] + [KEYBD C2] i.e. Global Mode
2. Select SYSEX DUMP option using (LEVEL) or [˄] or [˅] and [YES/SAVE]
to select
3. Select SYSEX RECEIVE
4. Select KIT and location to store downloaded KIT, using (LEVEL) or [˄] or
[˅] and [YES/SAVE] to select
5. System Waits to receive data
Use a SysEx tool to send KIT file
Installing PATTERN, SOUND,
GLOBAL Slot, SONG using
SYSEX
Follow same process as for KIT above
Summary of Contents for ANALOG 4
Page 3: ......
