Electron Plus CTL503, User Manual

Page: 8 / 24

CTL503 User Manual (using EPIC 21 software) - work in progress
8 / 24
Before you start
Please ensure you use the power supply adaptor supplied. It is important that this device is
powered with 11.75 to 12.5V, damage may occur if you exceed 12.5V.
Do not over-tighten the RED/BLUE/BLACK terminal post connections. You won't end up
with better curves and you will risk damaging the instrument.
If you wish to make a permanent safety connection to EARTH read Earthing for function
and safety section.
Like most 'old-style' curve tracers, the CTL503 is capable of
generating voltages in excess of 100V, users are expected to be fully
aware of the risks posed by these higher voltages and the
precautions and procedures required to maintain the safety of
personal operating the instrument and those nearby.
! If the red light is lit on the CTL503, assume there could be high
voltages present and act accordingly !