18
page
LOCK/UNLOCK
A PROGRAM
To lock or unlock a program, simultaneously press the down arrow of program 2 and the
PR
button of program 2 for 10 seconds.
You will see the lock symbol, illustrated above, in the section to the left.
•
To change the lock status: use the down arrows
to confirm the operation.
•
If the lock symbol appears: program locked, cannot be changed.
•
If the lock symbol does not appear: program unlocked; the user can change the program.
*Perform the same operation to unlock the program
TIMER
CHANGE THE LENGTH OF TREATMENT 0-60 MINUTES
•
Press the Timer button and the timer will blink.
•
The device will count down the elapsed time and will automatically stop once the time has run out
•
For the continuous treatment option, without interruption, keep pressing until the signal
C
appears. You will need to stop the device
yourself when you think the treatment has been long enough
.
Confirm the option selected by pressing the
S
button to save,
or press the arrow
to start the treatment
STOP/PAUSE
AN ONGOING PROGRAM
STOP
PAUSE
MANUAL CONTROLLER (
MANUAL Ctrl
)
FOR
NMES
ONLY
•
To use the manual controller, connect the wire on top of your stimulator.
The message (MANUAL Ctrl) will appear on your screen.
•
By pressing the button, you will be able to manually control your muscle contractions.
(Work Phase/Rest Phase)
For program 11 (pain relief in childbirth), the manual controller is used to change intensity quickly during childbirth. There are two intensity settings
for this program, one for the contraction phase and one for when the contraction has finished. Once the two intensity levels have been set,
you only need to press the button to toggle between them.
For the other programs, the manual controller will be used to toggle between the contraction work phase and rest phase.
3.3
3.4
3.5
3.6
To stop the stimulation, reduce the intensity using the down arrow
until the intensity returns to 0.00 or press the On/Off button.
At any time during treatment, you can pause for 5 minutes.
•
If the device is locked, unlock it by pressing the down arrow then pressing Pause
•
The timer will stop while paused as desired
•
To resume treatment, press Pause again
