Electromatic Equipment Co., Inc.
-4-
2.0
CALIBRATION CURVES
Name of Calibration
curve
Material under test
Fill quantity
300g corn stand.
corn standard
300g
300g corn hand
corn hand reaped
300g
300g rye
rye
300g
300g triticale
triticales
300g
300g whea/spe.pe
wheat / spelt peeled
300g
300g barley
barley
300g
190g oats
oats
190g
300g rape
rape
300g
230g pumpkin
pumpkin seed
230g
310g peas
peas
310g
300g soybean
soybean
300g
277g beetle beans
beetle bean
277g
295g horse bean
horse bean
295g
180g sunflower
sunflower seed
180g
reference
--------
--------
Reference: To test the humimeter FS2. Do not use for measuring the moisture!
Electromatic Equipment Co., Inc.
-9-
6.0
CHANGING BATTERIES
Your new device is provided with batteries.
Change the batteries:
1. Press with your finger onto the arrow of the battery
cap and pull it back.
2. Remove the empty batteries.
3. Put four new batteries in the device. Make sure the
position of the battery poles is correct.
4. Press down the batteries and close the cap.
7.0
DETERMINATION OF THE MATERIAL MOISTURE
The principle is a comparison measurement with the drying out method according to
DIN 10350: 1967 09. Take the measured sample and weigh it. Dry it out in an oven
and weigh it again. Following formula can be taken to determine the absolute
moisture:
Note:
The dried material may not be used any more for measuring purposes!
M
n
: Mass with average moisture content
M
t
: Mass of the dried sample
%F : Calculated absolute moisture
Exemption from liability
For miss-readings and wrong measurements and of this resulting damage we refuse
any liability. This is a device for quick determination of moisture. The moisture
depends on multiple conditions and multiple materials. Therefore we recommend a
plausibility check of the measuring results. Each device includes a serial number
and the guarantee stamp. If those are broken, no claims for guarantee can be
made. In case of a faulty device, please contact Electromatic.
%F =
x 100
M
n
- M
t
M
n
