How To Assemble
(continued)
7
Pull the electrical cord up
to the cord retainer and
firmly push down into
retainer. This will keep the
cord out of the way the
next time you vacuum.
Wind the cord around the
two cord hooks on the
back of the vacuum.
Secure plug to the cord to
prevent unwinding.
Store the extension tubes
on the side of the vacuum
in front of the hose.
Store the dusting brush.
8
9
10
11
How To Use
Helpful Information:
Listen
to your cleaner. If you notice a change in the
sound of the motor or a change in performance, it could
simply indicate a common usage or maintenance issue.
Such as, a need to raise or lower the carpet height
adjustment, possible blockage in hose or brush roll
area, or a broken or loose brush roll belt. These are
all easy to fi x and the instructions are included in this
handbook. Becoming familiar with the information in this
guide will help you to get the best possible performance
from your new cleaner for many years to come.
ON/OFF Switch
.
International symbol
I
means On, International
symbol
O
means Off.
Handle Release
.
Step
on handle release to pull
handle back to a comfortable
operating position. To lower
handle completely to the fl oor,
depress handle release a
second time.
Floor Type Selector
. An adjustment that raises or lowers
the cleaner base to match the type of fl oor surface. With the
cleaner cord unplugged, set the adjustment to lowest setting for
maximum carpet cleaning.
If the cleaner is diffi cult to push,
move adjustment to next highest setting until cleaner is
comfortable to push.
The brush roll must reach the carpet
for effective cleaning. For ease in moving the adjustment knob,
place handle in operating position and tilt cleaner back to
remove weight from front wheels.
Helpful Information:
Before cleaning under low
furniture, check area fi rst for
objects that might harm the
cleaner or block the vacuum
hose.
WARNING: Avoid injury. Keep loose clothing, hair,
fingers, and all other parts of body
away from any moving part (such as the
revolving brush). Turn off the switch and
unplug the cleaner before changing the
fl oor type selector.
5
