Electrolux WS290, User Manual

Page: 44 / 60

electrolux 42
Installation instructions
Before installation
Check that the input voltage indicated
on the characteristics plate is the same as
the voltage of the power outlet you are
going to use.
Open the drawer and take out all the
accessories and remove the packing
material.
Attention! The front surface of the
crockery heater may be wrapped in a
protective film . Before using the crockery
warmer for the first time, remove this film
carefully.
Make sure that the crockery warmer is
not damaged in any way.
Check that the
drawer opens and closes correctly. If you
find any damage, contact the Technical
Assistance Service.
Attention: the power socket should be
easily accessible after the crockery
warmer has been installed.
The warming drawer should only be built-
in in combination with those appliances
indicated by the manufacturer.
Installation
To build-in the appliance which is
combined with the crockery warmer, follow
the instructions set out in the respective
instructions and fitting booklet.
The relevant installation dimensions are
indicated in mm
in the diagrams shown
at the end of this booklet . Proceed as
follows:
1. Place the crockery warmer on the shelf
and slide it towards the interior of the
niche in such a way that it is centred
and completely lined up with the front
of the unit.
2. Check that the crockery warmer
‟s
frame is properly levelled and is sitting
evenly on the shelf.
3. Open the drawer and fix the crockery
warmer to the sides of the unit using
the screws provided.