Cooker Hood Operation
Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the
hood on a few minutes before you start cooking. It should by left on after cooking for about 15 minutes or until all odours have
disappeared.
Slide switch controls
Light switch:
Extractor fan switch:
Slide position I:
Slide position II:
Slide position III:
This switch is used to turn the light
fitted in the hood on and off.
Used to select fan speeds
Fan speed Lo.
Fan speed Med.
Fan speed High.
Press button switch controls
Light switch:
Depress light button to turn light
ON
. Press light
button to turn light
OFF
.
Extractor fan switch interlocked switching:
Select a fan
speed, depress button to turn fan
On
. Press button
(O)
to turn
fan
OFF
.
Replacing lamps:
Ensure the appliance is switched off before carrying out
maintenance, to avoid any possibility of electric shock.
Remove grease filter to replace lamp. Replace with 40W
(maximum) E14 candle lamp.
Recirculating accessory:
Optional carbon filter ARCFD for recirculating mode only.
Maintenance:
Clean grease filters every three to four weeks maximum. Greasy
filters are a fire risk.
Remove the grease filters, soak and agitate in hot soapy water.
Rinse, drain and shake well before replacing filters.
Do not
use oven cleaners or other caustic materials.
