Water drainage
The end of the drain hose can be positioned
in three ways:
1.
Hooked over the edge of a sink using
the plastic hose guide supplied with
the machine.
In this case, make sure the end cannot
come unhooked when the machine is
emptying. This could be done by tying it
to the tap with a piece of string or attach-
ing it to the wall.
2.
In a sink drain pipe branch.
This
branch must be above the trap so that the
bend is at least 60 cm above the ground.
3.
Directly into a drain pipe at a height
of not less than 60 cm and not more than
90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain
pipe must be larger than the outside diameter
of the drain hose. The drain hose must not
be kinked.
Important!
The drain hose may be extended
to a maximum of 4 metres. An additional
drain hose and joining piece is available from
your local Service Centre.
Electrical connection
Information on the electrical connection is
given on the rating plate on the inner edge of
the appliance door.
Check that your domestic electrical installa-
tion can take the maximum load required, al-
so taking into account any other appliances
in use.
Connect the machine to an earthed
socket.
The manufacturer does not accept
any responsibility for damage or
injury through failure to comply with
the above safety precaution.
26
electrolux
