Electrolux WA L2 E100, User Manual

Page: 17 / 48

17 Use
Select an additional rinse
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press simultaneously the buttons
2
and
3
for some seconds: the Extra Rinse
pilot light comes on in the programme progress display. This function stays per-
manently on. To remove it press the same buttons again until the
Extra Rinse
light goes off.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button
7
.
Changing a running programme is possible only by resetting it . Turn the
programme selector dial to
O
and then to the new programme position.
Start the new programme by depressing button
7
again.
The washing water in the tub will be not emptied out
Interrupting a programme
Depress button
7
to interrupt a programme which is running, the corresponding
light starts to flash. Depress the button again to restart the programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a programme which is running. Now you
can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing button
7
. The Door light goes off and
the door can be opened.
If the Door light does not go off and the door remains locked, this means that
the machine is already heating, that the water level is above the bottom edge of
the door. In this case the door can not be opened.
If you cannot open the door but you need to open it you have to switch the
machine off by turning the selector dial to
O
. After about some minutes the
door can be opened (pay attention to the water level and temperature!) .
After this procedure, you must select the programme again and depress button 7
to start it.
132968580 gb.qxd 01/10/2007 13.55 Pagina 17