Electrolux WA L2 E100, User Manual

Page: 13 / 48

Measure out the detergent and the fabric softener
Your new appliance was designed to reduce water, energy and detergent
consumption .
1. Pull out the dispenser drawer until it
stops. Measure out the amount of
detergent required, pour it into the main
wash compartment
and, if you wish
to carry out the prewash phase or to
perform the stain function, pour the
detergent or the stain remover into the
compartment marked
.
2. If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the MAX mark in
the drawer). Close the drawer gently.
Select the required programme
You can choose the right programme for any
type of laundry following the descriptions on
the washing programme tables (see Washing
Programmes).
Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.
Kalt/Froid = Cold wash.
The light of button
7
starts to flash and the display shows the duration of the
selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position «
O
» (Aus
Arrêt) to Reset programme/ Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position
«
O
» (Aus Arrêt), to switch the machine off.
Attention!
I
f you turn the programme selector dial to another programme when the
machine is working, the yellow pilot light of button
7
will flash 3 times to
indicate a wrong selection. The machine will not perform the new selected
programme.
13 Use
132968580 gb.qxd 01/10/2007 13.55 Pagina 13