12
23
25
24
26
7
13a
14a
14b
13b
8
Getting the best results
Hard floors and carpets:
* The Max In, Max In Turbo and Max In motorised floor
nozzles (7) detect the type of surface being vacuumed.
* The nozzle with the pedal is set to the type of surface to
be vacuumed: Position 1 for carpets (23) and position 2 for
hard floors (24).
* Use normal setting of floor nozzle for carpets (25)
* Use the brush setting of floor nozzle for hard floors (26)
Crevices, corners, etc.:
Use the crevice nozzle (12).
Upholstered furniture:
* Use the upholstery nozzle (13a).
* Use the combination nozzle as shown in (13b).
Reduce suction power if necessary.
Frames, bookshelves, etc.:
* Use the dusting brush (14a).
* Use the combination nozzle as shown in (14b).
* Using Max In nozzles
Max In, Max In Turbo and Max In motorised floor nozzles,
are ideal for both hard floors and carpets. The Max In
motorized nozzle receives power via the tube and hose,
and no additional electrical connections are needed. A
blue light on the nozzle indicates that the brush roller is
turning. If anything should become lodged in the brush
roller, the light turns off.
Note: Do not use the Max In Turbo or Max In motorised
nozzles on fur rugs, rugs with long fringes or pile depths
exceeding 15 mm. To avoid damaging the carpet, do not let
the nozzle stay in one place when the brush is rotating. Do
not pass the nozzle over electrical cords, and be sure to switch
off the vacuum cleaner immediately after use.
English
* Certain models only
1180066-24.indd 8
4/21/08 9:12:34 AM
Downloaded From Vacuum-Manual.com Manuals
