37
Connection
terminals
Display
Roller
Drive wheel
Rating plate Roller cover
lock button
Trilobite
Trilobite navigates using ultrasound. During Wall Mapping, it
receives information about the size of the room.Wall mapping
serves as the basis for the estimated duration for independent
vacuuming in the Normal vacuuming mode.
NOTE! Trilobite is not fully charged upon delivery.
Before using it the first time, connect it to the battery charger.
(Refer page 40.) A full battery charge requires approximately
two hours.
Battery charger
Put the battery charger on the floor, connect it to the mains and
place it with its rear side facing the wall. Allow a free space of 0.2
metres on the right side of the charger.When Trilobite has com-
pleted Normal vacuuming, it returns to the charger.The batteries
are then charged and it is ready for more work.
Magnetic strips
The magnetic strips serve as “virtual walls” and are important for
correct operation. Use them to e.g., block door and wall openings
and staircases. (Refer to page 41.)
Be sure to block staircases, landings, etc. with the magnetic
strips. If you do not do this, Trilobite can pass over e.g., a staircase
landing and cause injuries and damage to property.
A magnetic strip that has once been removed has poorer adhesive
capability.We therefore strongly recommend that you attach the
necessary strips once and for all. Never reuse a magnetic strip on
a stair or in any other important application where safety is an
important parameter. If you nonetheless choose to let the magne-
tic strip lie unfastened on the floor, make sure that the side with
the adhesive (with the protective paper backing) faces down-
wards! Use a pair of scissors or a knife to trim the magnetic strip
to the correct length. See page 41 in the user instructions to see
how the magnetic strip should be fitted. Magnetic strips are avail-
able in a range of lengths and versions, see page 48.
Emptying the dust collector
Empty the dust collector when the dust collector icon lights
in the display. Be sure to empty the dust collector if it is not
completely full.The light indicator may be due to e.g., a
blocked filter.
Self-adhesive magnet strip
Battery charger
Handle
Flexible bumper
Filter lid
lock button
Terminals for
connection
to charger
®
